| |
• Ready to Weld! Comes with Magnum 100L mig gun, adjustable gas regulator, hose kit, ground clamp and cable, and mild steel mig wire. Everything you need to weld! Just add a cylinder and shielding gas.
• This lightweight, compact 120V wire feeder/welder breezes through MIG welds on a wide range of materials including mild steel, stainless steel, and aluminum. It also handles flux-cored welds on mild steel with ease. Comes ready to weld with or without shielding gas, no additional kit required.
• Large easy to set knobs provide 4-position adjustable tap voltage control and continuous full-range control of wire feed speed.
• Welder settings reference chart conveniently located inside wire feed section door makes it easy to set the machine for mild steel welding jobs.
• Gun Trigger Safety feature keeps welding wire electrically "cold" until trigger is pressed.
• Adjustable break spindle accommodates both 8" diameter and 4" diameter spools of wire.
• Built-in "burnback" function virtually eliminates sticking in the weld puddle.
• Comes complete with comfortable 10 ft Magnum 100L Mig welding gun, built in gas valve, regulator and gas hose, power cord with NEMA 5-15P plug for connection to standard 120 volt receptacles, 10 ft work cable with clamp, guide tubes and reversible drive roll, 2 lb spool of .025 SuperArc L-56 wire, six spare.023/.025" contact tips, and welding handshield with #10 filter plate and clear glass cover plate.
• Processes: MIG (GMAW) and Flux cored (FCAW)
• Power: CV, DC, 1 phase, 60 Hz
• Material Thickness: Welds 24 gauge up to 3/16: with MIG and up to 5/16" with self shielded flux-cored wire.
• Applications: Maintenance, Construction, Auto Body, Farm/Ranch, Rental, Home.
• Rated Output at 20% Duty Cycle: 90 A at 19 VDC
• Current Range: 25-135 Amps
• Max. Open Circuit Voltage: 29V
• Wire Feed Speed: 50-300 IPM (inches per minute)
• Dimensions: H - 12in x W - 9.75in x D - 16.5in
• Net Weight: 47 lb |
